Tuesday, 14 March 2017

Brands Hatch Report

Hi all

So it was off to Brands last Friday for the first race of my season, couldn't believe it came round so quick, I'm used to starting my season at the end of April, not early March.

Still, the weather was kind to us and Friday was a test day. This was much needed as I last raced at Brands 18 years ago when I seemed to race there every weekend , so was very rusty.

It was a great day though and I got six 15 minute sessions, was great to get so much practice time in.

Even after such a long time since I was last there the circuit still went the same way, which was as about as much as I could remember, so had to re learn braking markers, turn in points and apex's, still it all started coming back to me.

The only problem I had with the bike was the wheel bearings decided to pick Friday to fail on me, which caused some handling problems.

One corner they'd be fine, the next they'd cause a vague feeling in the front end, still I battled on.

By the end of the day I felt more confident and was ready for Saturday.

The weather was again good for Saturday and it was off to qualifying.

Qualifying was a 15 minute session, after which I did a best time of 1:04, not great but I wasn't the slowest.

I was out for the first race and I had a good race long battle with another guy, who managed to stay in front throughout the race, but fun all the same.

My time improved to 1:01, so was pleased with that.

My second race I got a better start, only to lose it all as a guy on the grid in front of me stalled and was stationary on my line, so had to back off to avoid him, which cost me my tow on the back of the pack, so had a lonely race, which resulted in a lap of 1:02.

Sunday started out as another grand day weather wise, but we'd been promised heavy rain later in the day.

Luckily my first race, was second out, so weather was still good.

I managed to get another good start and had good race, and my time improved to 1:00, which is only 3 seconds off my previous best lap ever around Brands, 18 years ago, so not all bad.

Sundays second race was hit by the weather which we'd promised, but luckily it wasn't as bad as we'd expected, so the track was damp rather than wet.

As such I stuck with my intermediate tyres, but this was a mistake.

The sighting lap was ok, but as I entered the first corner after the start, the back end of the bike came around on me, so thought it was prudent to call it a day whilst still upright.

I was really surprised how slippery the circuit was and honestly thought it wasn't wet enough for full wets. I certainly wouldn't have fitted wets if I'd been racing on the roads, another lesson I've learnt about short circuits.

It was a good weekend and have realised how different racing on the roads is to circuits, but am sure I will get back into it with a bit of practice.

Talking of which, I'm off to Brands Hatch again this weekend for another two days of racing, which I'm excited about, fingers crossed all will go well.

On the subject of things being crossed, Steve found a use for my hot exhaust


Apparently they tasted lovely, and only a little metallic.

If you'd like to see some pictures of me in action then check out www.kentbadboyzphotography.co.uk who is the club photographer. I was number 24 in the Minitwins, wearing a white crash helmet, I mention that as Steve kept looking out for me wearing a black one.

Not many jobs to do between now and next weekend, luckily, being only a few days to go.

Hopefully I will have good stuff to write about next week, and will as soon as I can.

Cheers
Stuart

Friday, 10 February 2017

2017 Update

Hi all

Well despite the cold weather I’ve still been busy in the garage, apparently it was New Year a few weeks back, but I missed that.

The 400 engine was in need of lots of attention, and thanks to the great people at OCS Automotive Services in Winchester, the cylinder head is ready for fitting to the rest of the engine.

The Minitiwn has come along in leaps and bounds too and one of the jobs I thought would be a pain turned out quite easy.

The fairing I bought for it came off an undisclosed GSXR and I was in need for a new screen for it. Naturally it wasn’t the same as the one on the Supertwin, so my hunt commenced.

I took the screen to a bike show at Stoneleigh and asked Suzuki if they knew which model it came off, but they couldn’t identify it, so I contacted Skidmarx in Weymouth. I spoke with Ian who asked for a photo of the screen and he identified it straight away, which was a great surprise.

I’ve also picked up a Power Commander off a bike forum for a good price, so the Minitwin is well on the way to being finished, fingers crossed.

Not only have I been busy in the garage, but also in front of the lap top, trying to figure out what racing I hope to do this year.

I realised last year that I wasn’t getting a great deal of track time, just 5 meetings last season, so decided I would look to do some circuit racing to give me more time on the bike, which in turn should make me faster on the roads.

Most race dates came out in December so it was time to plan my season.

The biggest cost for racing in Ireland is the ferry, which costs the same as a race weekend over here, and in that weekend you get a full practice day followed by two race days, which comprise of two races each day.

As some of you will recall, last year I entered Killalane, which was then cancelled causing me to lose £250 in ferry fees, quite a chunk of cash to lose, which also made me quite wary about booking others.

The calendar for this years roads is very sparse, with only 7 national meetings, Tandragee, Cookstown, Skerries, Faugheen, Armoy,Walderstown and Dundrod. Killalane was originally on the calendar but this has already been dropped, which is a real blow, as despite my last visit I really like this meeting. Kells has also been dropped since the MCUI released the schedule, due to increased insurance costs, which is basically killing the sport.

It really doesn’t give me much confidence in planning to do any of the above for fear of them being cancelled as well, which I hope doesn’t happen.This is a real shame as I love racing over in Ireland and am going to miss loads of great people over there, but hopefully I will get over at some stage.

As such I decided that this year I would mainly race circuits and if I can I will pop over for some roads, if funds allow.

This means that I will be returning to some circuits which I haven’t raced for a good few years Brands, Silverstone, and also go to some I’ve not been to before Snetterton, Cadwell and Donington.

Even though I love road racing it really isn’t practical this year but I’m still excited at the prospect of a busy schedule, as you can see from my race dates above.
I will also be at Southern 100, all being well, and depending on how I get on, maybe a trip to Ireland as well. There’s no rush so will just take things as they come.

I will be racing the Minitwin on the circuits, and using the Supertwin and 400 on the roads.

It’s quite strange as I’ve now joined NG Racing and BMCRC clubs, both of which I raced with when I first started racing. I’ve also been given number 42 as my race number, so have almost gone full circle as that was my given number last time I raced with them.

My season is quite busy, with my first meeting with BMCRC at Brands Hatch on 11th March, so not much time to get those last minute jobs done.

Talking of which, I hear the garage calling.

So until next time

Cheers
Stuart


Monday, 26 December 2016

A Short Tale

So, one sunny July evening Mr. Piston was enjoying a nice trip along the wonderful roads of The Isle Of Man, just outside Castletown to be precise.

He was feeling rather good, going up and down, and all was good with his world.

He could hear his next door neighbour doing the same, and it was a nice feeling that he was flying along one of his favourite roads, doing what he was designed to do.

There he was lost in his own little world when he got an unexpected surprise.

It was Mr. Valve.

'Hi,remember me, Mr. Valve, you said if I was ever passing to drop in.'

And drop in he most certainly did, at about 14,000 rpm.

I finally got to strip the head and piston out of my 400 engine that went pop at this years Southern 100, and this is what I found.








A bit of a mess, to say the least.

So now starts the rebuild, and as it's apart I will try and squeeze some more power from her, seems rude not to.

Luckily I have quite a few spare engine bits as they are starting to become harder to find, but have enough for a couple more rebuilds.

It's a shame as there was talk of running a 400 class at The Classic TT next year, but that isn't going to happen, but am sure there will be a 400 class on the roads.

Luckily I enjoy rebuilding engines so it will be no hardship.

Some bits are already being prepared so I will update as we move along.

So with Christmas over, it's back to the garage for me.

Have a great New Year and am already looking forward to the new season, just hope I will be ready for it.

Cheers
Stuart


Friday, 28 October 2016

Fun With Fibre Glass

Well it's all been busy here at Black Dub HQ, and for a change it's not involved spanners and oil, but fibre glass.

I picked up a GSXR fairing off 'the bay of e', but it was in quite a sorry state, hence why I got it for £35.

The seat unit was ok, it just needed a few holes filling and new ones drilling to mount it onto the Mini Twin. The top fairing was a bit bashed about, so just needed a few cracks filling and making pretty, but the belly pan was in a bit of a mess.

When I collected it the guy said he didn't know which model Gixxer it came off as it was fitted to a Kawasaki when he got it.

As such whoever had fitted it had cut the belly pan down the middle and loped the rear end off it.

Now to be suitable for racing, the belly pan has to hold the contents of the sump, in the event of it leaking, so a lot of work had to be done to make it water tight again.

Luckily my Dad is a trained boat fitter, so what he doesn't know about fibre glassing isn't worth knowing.

As a kid my Dad was repairing a boat he had bought, so I remember many a day helping him mixing resin and laying fibre glass. This is also where my love of the smell of fibre glass came from.

So with the knowledge I had I set about fixing the fairing.

Ideally I would've had a mould to work from, but no such luck, so had to build it free hand.

After purchasing an industrial size amount of matting and resin, a hefty £15, I started to work out how I was going to tackle this.

Firstly I made 3 pieces of fibre glass sheet by laying the matting on a piece of glass, so I would have a nice flat side. So the resin doesn't stick to a mould, you should use a special polish, I found Mr Sheen works just as well.

The sheets turned out fine, but I realised that attaching them to the fairing would be a pain, so it was back to the drawing board. After a chat with my Dad I realised I could cut one big piece of matting, attach it to the fairing and then use my glass mould technique to make the sides and the bottom of the belly pan.

So over 3 evenings I managed to mould the two sides and the bottom in one piece. This just left the end piece. Luckily I hadn't thrown out the 3 bits I had made earlier, and one of these, when cut to shape, fitted perfectly. It was then just a case of attaching this to the belly pan, which was simple enough.






With it all dried, and as one piece I offered it up to the bike, and with minimal fettling, it fitted great.

There is a lot of making good needed, but that's ok body filler is quite cheap.

Overall I'm really pleased with the way it has turned out. It's not great but does the job, and once painted, you'll never notice it.


Now it's just a case of fabricating some brackets to hold it on, and job's a good 'un.

So it's back to the garage for me.

Cheers
Stuart

Saturday, 8 October 2016

Thruxton 8th October

Hi all

Well this must be a record for me, an update on the same day I raced. Oh the joy of racing at a circuit 10 minutes from my house.

I thought I was for an early start today as the entry form said that scruitineering was from 0700 to 0800 race day. Luckily on the final instructions I found out that I could get all this done, and sign on the day before between 5 and 7pm, happy days, a lay in.

So I loaded the van and set off for the circuit yesterday evening shortly before 5. I was back home, tucked up, before 6, result.

This morning we awoke to a dry but chilly day and set off for the circuit. By 8am we were ready to go, so just waited around until first practice just after 9.

This is where things started to go down hill.

I haven't raced at Thruxton for 20 years, and although it still goes the same way, I'd forgotten how flat and barren short circuits are. No trees, lamposts, buildings to judge anything by, so it was a real wake up call and took some getting used to.

The bike went well, but didn't feel too stable and after practice had a good look over her.

Nothing had come loose, there was nothing missing and no leaks, so all was good there.

I paid particular attention to the front end, but could find nothing untoward apart from the headrace bearings which needed a slight tightening, which I put down to bedding in.

During the first race the steering got worse, so decided to pull in rather than trying to ride around the problem.

Upon inspection I could find nothing wrong so set off to get some expert advice.

Luckily I found Will from JHS Racing, who specialise in tuning SV's, the guys I got my crank from. He set the suspension up as best he could but said that what I had wasn't really up to the job.

I went out in the second race and to start with she felt a lot better, but as the race went on and the suspension worked harder the oil in the forks and shock absorber, got warmer and thinner, so the problems started to reappear.So again I pulled in rather than risk a coming off.

So despite not finishing either race the day was somewhat of a success as it was really a shakedown to see if the bike was ok, and by and large, she was. All the work I did on the engine seems to have been ok and she held up well, but sadly the bolt on suspension needs some more work. Still I would rather find out now than at the beginning of next season, as at least I have the Winter to get the suspension looked at, in readiness for next year.

So rest assured I have already started one of my famous lists, but luckily, it's not too long, for now.

As you can see she looks pretty good, not a great colour match for the tank and fairing, but the rest looks pretty neat, and was certainly not the worst looking bike at the meeting.



Luckily I was given number 42, the number I was given by North Gloucester, as it was then, over 20 years ago.

Sadly that is my season over now. I can't believe how fast it has gone, but it has been a short one for me this year, especially with Killalane being cancelled.

But all being well, I will be back out next year, as still have my passion for racing, so hopefully the long cold Winter months spent in the garage will fly by and I will be up and ready for next year.

I will keep you up to date with whats happening in between now and next season, so please keep checking in for updates.

Until next time, stay safe

Cheers
Stuart 

Friday, 23 September 2016

Remember Me?

Hi all,

It's been a while, just been really manic here.

So what's been happening?

Well Skerries and Southern 100 were the main things obviously.

Skerries was a wet and wind affair. 400 went well, but the Supertwin races were a case of changing between wet and dry tyres, and usually me ending up with the wrong ones.

John was my help for Skerries, and he later claimed that he'd never changed wheels so many times in his life.

The second Supertwin race was a washout, and after the sighting lap I decided that as I had The Southern the following week, I'd rather save the bike for then, rather than drop the bike and having a lot of work to do before racing started. The race went ahead but the following Superbike race was cancelled, so felt I made the right decision.

Shame as the bike felt good after the work I did over the Winter and looked great with her new fairings painted and fitted.


As you can see she's looking good, you can also see how windy it was by our neighbours awning.

The more eagle eyed of you can see a new name sticker gracing the screen. Thanks to Shuffy for designing it for me.

The 400 went well, but I went out on wets on a dry track. I was later told that you could see her moving around a lot coming out of corners, and I just thought it was me.

I went over to The Isle Of Man and had a week 'off', basically it was a week working on bikes, but out of a different garage.

This bits a long story, so get a coffee.

Earlier in the year I got a given a SV650 after Gordon's son ran it out of oil, he thought it was the cam chains making a noise.

So I decided to turn it into a minitwin to use on short circuits to get more track time.

Before I went to Skerries I started it up to see how bad the damage was.

On tick over she sounded ok, but open the throttle and it was a different story. To replicate the noise, first get a sturdy bag, fill with spanners, then put it in the washing machine, get the idea?

So I decided to take the engine in the van over to The Island and strip her down to see what damage had been done.

Upon our arrival John and I stripped her down, and was greeted with a mess, but could've been worse and damage was limited to the crank and rods, so project minitwin was go.

Southern 100 went well, great organisation and good weather made it a great week.

Sadly I blew up the 400 engine in the first race, when a valve broke.

Luckily I had a spare 400 engine in the van, as you do, so Steve and I set about swapping the engines over.

Engine swap went well but on the first lap the clutch cable came adrift, so that was race two out the window too.

Supertwin went well and had some good races, despite getting a puncture, luckily just as I came back into the paddock.

Next up was Killlane, which sadly was cancelled, two days after I booked my ferry, which lost me over £200, but can't be helped.

So that was a very short roads season this year, but onwards and upwards and I'm entered to race at Thruxton on 8th October.

I haven't raced at a short circuit since 2006, and I last raced at Thruxton in 1996, sure it still goes the same way though, so is going to be a big change for me.

The bike though, is looking good, but still loads to do according to by ever present list.

Hopefully getting her finished won't mean too many more late nights and I will have a good run round.

I'll try not to leave it so long until my next update, and if you are at Thruxton come along and say hello.

Cheers
Stuart

Monday, 18 July 2016

Southern 100 On TV

Hi all

Just back from almost 3 weeks away, firstly Skerries followed by Southern 100.

Will write up a full report once sorted out, but just to let you know highlights of Southern 100 will be on ITV4 Wednesday 20th July at 8pm.

Keep an eye out for number 99, as that's me.

Cheers
Stuart