Wednesday, 11 March 2015

....And So It Goes On


Greetings from the garage.

Yes I'm still busy working away in the garage, I have to be as my mate told me the other day I have about 5 weeks until Cookstown, just wish my 'to do lists' realised this.

My latest job has been fitting my ram air box to the 400. My Dad very kindly came to assist, naturally he asked if it was going to be a difficult job. On the face of it no, but expierence has told me never say it will be a 5 minute job, as they never turn out that way.


All I can say is thank goodness for Dremels.

Because there are so many variants of the ZXR the fitting instructions said it would need to be cut to fit. It hasn't been too much trouble apart from the ignition coils which were in the way.

When I read the blog by the guy who supplied the box, he encountered the same problem. But being a shop he simply fitted some stick coils, which he had laying around, to solve the problem.

So yesterday evening was spent trawling the interweb to find out what I needed.

Luckily the ZXR forum came up trumps, followed by a search on The Bay which provided the bits I need. A deal was done and hopefully they will arrive in time for the weekend to be fitted.

Below is a picture of where I'm at with it at the moment.





I know it doesn't look much but this little beauty should add some much needed horse power.

There is still quite a bit to do with a bracket that needs to be made and fitting the new coils.

So this weekend I'm looking forward to suffering the burnt finger tips associated with soldering.

Until next time.

Cheers
Stuart

Thursday, 19 February 2015

Long Overdue Update

Hi all

Apologies for the delay in updating my site. This has mainly been down to not having a computer at the moment and also I’ve been in the garage almost every spare minute.

I’ve stripped and rebuilt the 400 engine, with no real great dramas. I’m hopeful that I have managed to recapture some of the horses I’d lost over the years with the refresh.

Nothing was out by a major amount, just little bits here and there, still is all back together now and my nice new ram air box arrived the other day so hope to fit that in the next week or so and then visit the dyno to see if my hard work has paid off.

With the 400 finished I started work on the Supertwin.

There were only a few bits to do and the last item on my list was to change the oil. Luckily for me I don’t do my list in order as when I drained the oil I noticed the colour was odd.

It didn’t look like water was getting in but checked the radiator in case, sure enough it was empty, and as I topped it up liquid poured out of the sump.

My immediate thought was that the head gasket had gone, so stripped both the heads off. It was only when I removed the heads that noticed the core plugs, which are used to fill holes used in the casting process, which meant the water jacket leaked straight into the engine.

I’ve since had the core plugs replaced and the other head pressure checked to make sure the other plugs are ok. Am still not sure how the plugs came to fall out, but just glad I found out now rather than nearer the first race.

Talking of which, my entry has been accepted for Cookstown and Tandragee, which is good news.

Entries arrived for The Classic TT, Manx Grand Prix and Southern 100 this week, all of which have been completed and sent off, so fingers crossed I get to race in all three.

Hope to be in touch soon.

Cheers
Stuart 

Tuesday, 16 December 2014

Race Dates 2015

Hi all

Well the season has only been over a couple of months and at long last next years dates have been released.

I've listed all the National Races in Ireland and also a few on Isle Of Man, as these are the ones I would like to do, but as always work and financies will dictate where I end up.


24TH/25TH APRIL COOKSTOWN 100


1ST/2ND MAY  TANDRAGEE 100


30TH MAY - 1ST JUNE PRE TT CLASSIC


20TH/21ST  JUNE KELLS ROADRACES


3RD/4TH JULY SKERRIES 100


6TH-9TH JULY SOUTHERN 100


11TH/12TH JULY WALDERSTOWN


24TH/25TH JULY ARMOY


15TH/16TH AUGUST FAUGHEEN


22ND AUGUST - 4TH SEPTEMBER CLASSIC TT/ MANX GRAND PRIX


5TH/6TH SEPTEMBER KILLALANE ROADRACES

Hopefully I will be able to do as many as possible, but we will see.

Maybe see you at some?

Cheers
Stuart

Sunday, 7 December 2014

Engine Work Begins

Hi all

Well after getting my bikes back it didn’t take long to start fiddling, and was only a matter of days before the engine was sat proudly on my bench.

Before removing it from the frame I did a compression test on the cylinders, as this may help determine where the missing horse power has gone.

As with the dyno, it wasn’t great news as it showed that I had between 90 and 110 psi whereas I should be getting a minimum of 100 and up to between 160 and 170 psi.

Loss of compression can be caused by two things, either the valves are not closing properly, usually due to a build up of carbon on the seats or the shims that open the valves are wrong, or the piston rings are worn.

To check which is happening at this stage I poured a small amount of oil into the cylinder, if the compression goes up it means the rings are worn as the oil acts as a sealant, if it stays the same then the valves need attention as this would not be affected by the oil.

The compression went up to 160, so this means either the rings or the bores of the cylinder have worn, I’m hoping it’s the rings. Just goes to show worn rings are usually spotted by blue smoke from the exhaust as oil is burnt with the fuel, but on mine there was no sign of blue smoke.

Still this is only theory at this stage as the engine needs to be stripped and then I can measure the rings and bore to see which is worn. 

This one I call engine on the bench.
 

It didn't take long to strip the engine, far too much practice, sadly.

The bores showed signs of wear so I have choosen to use another set of barrels which I had as spares. I also measured all the bearings on the crank and con rods, and ordered new ones.

I've also bought a new cylinder head which has been tuned, so await that with baited breath to see if it is any good.   

With the head off I checked to see if any of the vavles were leaking. I did this by putting a small amount of parafin down each valve and left it over night. When I checked the next day I could see the head was wet meaning the valves were not seating correctly.

From this I can see that I need to grind the vavles to fit the face they sit in, this is called lapping the valves in. I will also check to see if the springs are still strong enough to close the valves properly, this is simply done by measuring them.

So now I'm just waiting on bits to be delivered, and postie is quite busy at this time of year, so am having to wait longer which is really frustrating as I am so keen to see if I've improved my engine at all.

I'll give you an update just as soon as I have a progress report.

Cheers
Stuart

Wednesday, 3 December 2014

Hi all

Sorry for the delay in an update, but decided a couple of months off from fiddling with bikes was in order. Still, bikes are now back home and my first job was to get the bikes put on a dyno to see what power they are currently putting out.

For this I went to Double Take Motorcycles in Southampton.

Double Take is run by twins, Nick and Chris Sansome, who I’ve known since before I started racing. In fact it was Nick who showed me his ZXR400 so that I knew what I was getting into.

The plan is to see what the bikes power is now and then after Winter fiddling, hopefully it will have gone up.

The Supertwin seems to be running well, the best Nick has seen in fact, and is putting out a healthy 76hp. Not quite as much as I’d hoped by still good.

The results for the 400 were less favourable. A standard ZXR puts out about 64hp and mine, which has a race exhaust, has slightly upped compression and runs a total loss ignition, was putting out 54hp.

The fuelling was described by Nick as ‘shocking’ as it was running very lean.

So the plan is now to check the compression of the engine, then strip her down and give her a good check over and try to locate the missing ponies, I have been told that most will return when the fuelling is sorted, which will happen when I fit a ram air box during the rebuild.

Nick also managed to shed some light on the misfire of the SV, as he told me that the routing of the wire from the quickshifter to the power commander maybe close to an HT lead as it can pick up interference from such a cable, which will cause the quickshifter to cut the engine, so fingers crossed this is the case.

I know this should be bad news about the 400, but am looking at it that it’s not me getting slower and it’s the bike, which is fixable, so all good.

I will keep you all up to date as to how the rebuild goes over the coming months, and hopefully have a better dyno printout. 

I've also received some pictures from Skerries and Killalane, from Jack Chambers, thanks for these Jack.

 



 Speak soon

Cheers
Stuart

Check out Double Take at www.doubletakemotorcycles.co.uk

Tuesday, 23 September 2014

Killalane Report

Well after my trip to The Clasic TT it was off to Ireland for Killalane, one of my favourite circuits.

Weather was due to be good all weekend, which was just as well as we had to sit in the paddock for 7 hours before my practice sessions started. When I say started, I had 3 one after the other. Not sure why it was arranged like this as most of the guys in the three classes race in all 3 so why not spread them about?

First off was the 400. How different it was to riding the 888 a couple of weeks before. I only had to think about a corner and I was laid over, it was so light.

My racing at The Classic did me good as felt a lot more confident on corners which wasn’t keen on at Killalane before, which felt really good, and on my 400 knocked 3 seconds a lap off last years times.

Next up was the SV. Since I last rode her I replaced the throttle with a quicker action one. To start with I didn’t get on with it as it didn’t seem to shut off very well, I thought it was just me to start with so forced myself to shut the throttle rather than let it shut.

Practice went well on the SV and rode around one guy on a corner, only to then miss my braking point which caused me to run straight on.  

I rode round to the holding area after the second practice for a quick splash of petrol, only to be told that it had been delayed until 10am the next day, which was a blessing as wanted to change the gearing on the SV before I went out again.

Sunday morning dawned glorious, so was a bit confused as to what the delay was for our practice session to start.

Turns out that the fire brigade decided to test a hydrant next to the circuit, spraying water all over the corner. Race officials decided they couldn’t put anything on it, so let it dry out naturally, and we would just have to be careful on this flat out kink. Not sure who the brains were that decided to do this test just before roads close and must have been an annoyance to the club who have to have roads open by a certain time, and the 30 minute delay didn’t help.

Practice went well but still couldn’t get on with the new throttle. When I looked the throttle rubber had settled on the tube and was now rubbing against the brake protector. I loosed the protector and throttle wasn’t sticking, so a cheap and easy fix.

I was out on the 400 first and had a good dice with Yvonne and Davy Black until I messed up a couple of corners and lost the tow, which allowed them to pull away from me.

Next up was Supertwin, and gave John McCann stick as he’d qualified 3rd on the grid, and wasn’t sure if he’d still talk to the little people, like me who started 12th?

I got a good start and, overtook a few and was soon on Johns tail. I could see where John was quicker and where I was likely to be able to overtake him.

Around the back of the circuit is a section which looks bad every time you approach it, but when you know it, it’s pretty much flat out. I could see this would be my best bet to get passed John.

I got a good drive out of the last corner in this section and eased past John on the brakes, which felt good.

I then passed, and was repassed by another guy on the last lap, but sadly I couldn’t get passed before the finish flag was shown.

Still I was happy to see that I had finished 9th, so a good race.

I later spoke to John who said he’d lost his mojo and just wasn’t in to the race, which was a shame.

Still we had one race left together, so hoped it would return for him.

John was again ahead of me on the grid but I soon found myself behind him and another guy, and what a race we had.

We were all of the same ability, so were going into corners 3 abreast at some points and as the race went on the defensive lines became more extreme going into corners, so that no one could sneak up the inside.

I could see John had his mojo back and he got quicker each lap through the back section, which like most of the circuit is one line only. I think all three of us had a turn at leading our group at some stage, so made for a great battle, and was a great race to end my season on.

So that’s another season done and dusted for me. I can’t believe how quick this year has gone, can’t believe it was 5 months ago that I first rode my SV.

Have to say I’ve had a great time, with some great racing and meeting new friends, sad times too with the loss of Noel at Tandragee.

I have started to look at what I want to do next year and at the moment I will try and get more power out of the SV and 400, so there will still be updates as to how I’m doing with that.

Now I’m back home I hope to get some pictures from Classic TT up on the site, do apologise but haven’t been around to sort this yet.

I’d like to thank all those that have helped during the year. Special thanks go to Stafford and Liz for lending me the Ducati for The Classic TT and to Steve who has been a great help as always, wouldn’t be able to do it without him.

So until next time, many thanks for reading and your continued interest and support.

Cheers
Stuart

Sunday, 14 September 2014

Classic TT Photo's

Hi all

Sorry it's taken a while but here are some pictures from Classic TT

Ready in pit lane.



Ready for the off


Off we go

3 Laps later
The spoils

Hopefully I will have some more photo's soon, and hope you enjoy these.

Cheers
Stuart